Name: Aquamate Skinbooster Injector
Brand: Aquamate
SKU: FF-AQMT
Price: 799.00 USD
Availability: InStock

Quantity

Discount

Price

5-9

$775.03

10-19

$759.05

20-Unlimited

$735.08

Wireless vacuum skin-booster injector · Professional device

The Aquamate Skinbooster Injector is a wireless, vacuum-assisted mesotherapy device that places skin-booster solutions into the dermis through a 34G 9-pin needle array, using negative pressure and a pressure-sensor plunger for uniform, controlled delivery.

Needle

34G · 9-pin

Depth

0.8 / 1.0 / 1.2 mm

Power

3500 mAh · ~90 min

Class

CE Class IIa

Overview

What it is

A professional, cordless mesotherapy/skin-booster delivery system. A 34G nine-pin array (0.18 mm outer diameter) deposits non-cross-linked hyaluronic acid and similar boosters into the dermis under operator control via a 1.6″ LCD interface.

How the vacuum works

A negative-pressure system (150–250 mmHg across five levels) gently lifts and isolates the target tissue so the nine pins enter at a consistent depth, helping align delivery and reduce the risk of vascular penetration.

Reduced product loss

A pressure-sensor plunger plus a 0.2 mm reverse retraction at the end of each cycle relieves residual pressure, which limits dripping and helps conserve costly biologic product.

Hygiene & power

An external, disposable PTFE vacuum filter (0.22 µm) and closed-loop suction tubing protect the motor and limit cross-contamination; a 3,500 mAh battery gives about 90 minutes of cordless use (≈120 min to recharge).

Technical data

Needle array	34G (0.18 mm OD), 9-pin simultaneous delivery
Depth settings	Fixed at 0.8 / 1.0 / 1.2 mm
Negative pressure	150–250 mmHg, 5 adjustable levels
Anti-leak	Pressure-sensor plunger; 0.2 mm reverse retraction per cycle
Syringe compatibility	1 cc / 2 cc / 3 cc / 5 cc Luer-Lock
Dose / viscosity	Dose levels 1–9; viscosity levels 1–5
Filtration	External disposable PTFE vacuum filter, 0.22 µm
Power	3,500 mAh Li-ion; ~90 min cordless; ~120 min full charge
Body	470 g; 48° handle; 220 × 40 × 190 mm; 1.6″ LCD; 100–240 V input
Regulatory	CE Class IIa; professional use only

For practitioners

Fit a fresh disposable PTFE vacuum filter and an appropriate sterile needle cartridge before each treatment.
Load a Luer-Lock syringe (1–5 cc) with the chosen skin-booster solution and prime the line.
Select the depth (0.8 / 1.0 / 1.2 mm), dose level and suction level appropriate to the area and formulation.
Hold the handpiece perpendicular to the skin so the vacuum seats the tissue, then deliver in an even stamping pattern.
Replace the vacuum filter when visibly saturated and dispose of needles as clinical sharps.
Operate only as a licensed medical professional, following the device operating manual.

FAQ

What is the Aquamate Skinbooster Injector used for?

It is a professional device for delivering skin-booster and mesotherapy solutions — such as non-cross-linked hyaluronic acid — into the dermis in a uniform, controlled pattern, faster and more consistently than freehand needling.

How does the negative-pressure system help?

The vacuum (150–250 mmHg over five levels) lifts and isolates the skin so the needles enter at a consistent depth. This supports even delivery and helps reduce the chance of vascular penetration.

What needle does it use?

A 34G nine-pin array with a 0.18 mm outer diameter, with fixed depth options of 0.8, 1.0 and 1.2 mm for dermal targeting.

How does it limit product waste?

A pressure-sensor plunger together with a 0.2 mm reverse retraction at the end of each cycle relieves residual pressure, which reduces dripping and conserves the injected product.

Which syringes and volumes are compatible?

Standard 1 cc, 2 cc, 3 cc and 5 cc Luer-Lock syringes.

How long does the battery last?

The 3,500 mAh battery provides roughly 90 minutes of cordless operation, with a full charge taking about 120 minutes.

How is hygiene maintained?

An external, disposable PTFE vacuum filter (0.22 µm) and closed-loop suction tubing help keep blood and fluid aerosol out of the motor housing and limit cross-contamination; the filter is replaced when saturated.

Who is allowed to operate it?

It is a CE Class IIa device intended strictly for licensed, trained medical professionals, used according to the operating manual.

Regulatory & safety notice. The Aquamate Skinbooster Injector is a professional CE Class IIa medical device for use only by licensed, trained medical practitioners. Use a fresh sterile needle cartridge and vacuum filter per patient, follow the operating manual, and observe local medical-device handling and clinical-sharps/biohazard disposal rules. This page is informational and does not replace the manufacturer’s operating instructions.

Reviews

There are no reviews yet.

Be the first to review “Aquamate Skinbooster Injector”