The Rejumate Vacuum Filter is a disposable PTFE filter for the suction line of vacuum skin-booster injectors. Its 0.22 µm membrane keeps blood and fluid aerosol out of the motor housing while maintaining stable negative pressure; supplied two per pack.
What it is
A disposable in-line vacuum filter that fits the suction circuit of a compatible vacuum skin-booster injector. The hydrophobic PTFE membrane has a 0.22 µm pore size.
What it does
It blocks blood and fluid aerosol — and microorganisms at sterilising-grade pore size — from being drawn into the motor housing, protecting the pump and helping prevent cross-contamination.
Why it matters
By keeping the vacuum line clear and dry it helps the device hold a stable negative pressure, which in turn supports consistent needle depth during treatment.
Replacement
It is a single-use consumable: replace it according to the device manual — for example after a treatment or when the filter is visibly saturated — and never wash or reuse it.
| Type | Disposable in-line vacuum (suction-line) filter |
|---|---|
| Membrane | Hydrophobic PTFE |
| Pore size | 0.22 µm (sterilising grade) |
| Function | Blocks blood/fluid aerosol and microbes from the motor; maintains negative pressure |
| Reuse | Single-use — do not wash or reuse |
| Replacement | Per device manual / when visibly saturated |
| Pack size | 2 pieces per pack |
| Use | Professional use with a compatible vacuum injector |
- Fit a fresh filter into the suction line before each treatment and check that it is seated correctly.
- Confirm the device holds stable negative pressure once the filter is installed.
- Replace the filter when it is visibly saturated or per the device manual’s schedule.
- Do not wash, rinse or attempt to re-sterilise a used filter.
- Dispose of used filters in line with local clinical-waste/biohazard rules.
- For professional use only with a compatible vacuum skin-booster injector.
What is the Rejumate Vacuum Filter?
It is a disposable PTFE filter that installs in the suction line of a compatible vacuum skin-booster injector to protect the motor and keep the vacuum circuit clean.
What is the pore size and what does it block?
The hydrophobic PTFE membrane is 0.22 µm — a sterilising-grade pore size — which blocks blood and fluid aerosol, and microorganisms, from entering the motor housing.
Why is the filter important?
It keeps the vacuum line dry and clear, which helps the device maintain stable negative pressure and supports consistent needle depth, while reducing the risk of cross-contamination.
How many filters come in a pack?
Two filters per pack.
When should it be replaced?
It is a single-use consumable; replace it according to the device manual — for example after a treatment or when the filter is visibly saturated.
Can it be washed and reused?
No. It is single-use and must not be washed, rinsed or re-sterilised.
Which devices is it for?
It is for use with a compatible vacuum skin-booster injector that uses an in-line suction filter.
Who should handle it?
Licensed, trained professionals, who should dispose of used filters according to local clinical-waste rules.

Reviews
There are no reviews yet.