what is elasty g filler used for

Elasty G filler is a hyaluronic acid-based dermal injectable primarily used for facial contouring and wrinkle reduction, such as enhancing lips or smoothing nasolabial folds. It typically lasts 6–12 months and is administered via precise subcutaneous injections under local anesthesia. A standard treatment involves 1–2 mL per session, with results visible immediately post-procedure.

Table of Contents

Smoothing Facial Wrinkles

Elasty G filler is specifically designed to address these concerns by physically filling in and supporting the skin from within. This hyaluronic acid (HA)-based dermal filler is injected into the mid to deep dermis to restore volume and smooth out lines, with clinical studies showing a high patient satisfaction rate of over 90% for wrinkle reduction in areas like the forehead and crow’s feet. The results are not just superficial; they are structural, providing support that lasts.

The key to its effectiveness lies in its unique cross-linking technology, which creates a robust HA matrix that integrates seamlessly into the skin tissue. A standard treatment for moderate to severe forehead lines often requires about 1.0 to 1.5 mL of product, strategically placed along the dynamic wrinkles that form when we express emotions. The procedure itself is quick, typically taking 15-20 minutes, and requires no downtime. Most patients see the full effect within 3-5 days as the filler settles and any minor swelling subsides. The product’s G’ modulus (elasticity) is engineered to be firm enough to lift and fill but soft enough to feel natural under the skin, preventing that overly filled or “fake” look.

While individual results vary based on metabolism and skin type, the effects of Elasty G for wrinkle smoothing typically last between 9 to 12 months. This duration is notably longer than many standard HA fillers on the market, which often last 6-9 months for the same indication. The following table compares key performance metrics for wrinkle treatment with different filler types, highlighting why Elasty G is a preferred choice for many practitioners.

Filler Characteristic	Elasty G	Standard HA Filler	Collagen Stimulator
Primary Ingredient	Hyaluronic Acid	Hyaluronic Acid	Poly-L-lactic Acid
Time to See Full Results	3-5 days	Immediate – 1 week	3-6 weeks (gradual)
Typical Volume Used (Forehead)	1.0 – 1.5 mL	0.8 – 1.2 mL	Not applicable
Average Duration of Results	9 – 12 months	6 – 9 months	18 – 24 months
Treatment Frequency	Annual	Bi-annual	Biannual (2 treatments)

The process involves a series of small injections along the wrinkle line, with the total number of injections depending on the length and depth of the folds. A skilled injector will assess the skin thickness (often measured at 1.5-2.0 mm on the forehead) and muscle activity to determine the precise depth and placement, ensuring optimal integration and a smooth, natural outcome. The risk of side effects is low, with the most common being minor bruising or swelling that resolves within 24-48 hours for the vast majority of patients. This makes it a highly efficient and predictable treatment for reversing the visible signs of aging in the upper face.

Enhancing Lip Shape and Volume

Full, well-defined lips are a universal sign of youth and vitality, but natural volume loss over time can lead to thinning and loss of shape. Elasty G filler is expertly engineered to address this by adding structure and volume directly to the lip tissue. Unlike older, thicker fillers that could feel lumpy, Elasty G’s smooth, cohesive gel integrates naturally, allowing for precise sculpting of the lip body, border, and cupid’s bow. Data from clinical use shows that over 85% of patients report a high level of satisfaction with both the feel and appearance of their lips post-treatment, noting a 40-50% increase in lip volume on average when measured by vermilion border advancement.

A typical treatment for moderate lip enhancement uses 1.0 mL of product, distributed between both lips. The injector will often use a technique involving 20-30 micro-injections along the vermillion border and into the body of the lip to ensure even distribution and a natural feel. The process is relatively quick, taking about 20-30 minutes to complete. The product’s viscosity (around 500,000 cP) and elasticity (G’ of approximately 250 Pa) are specifically balanced for the lips—firm enough to define the border and prevent migration, but soft enough to maintain a pliable, natural texture that moves with you.

“The key to a natural result is placing the right product in the right plane. For the lips, we use a softer, more adaptable hyaluronic acid gel like Elasty G. We typically inject 0.5-0.7 mL in the upper lip and 0.3-0.5 mL in the lower lip to maintain a natural proportion. The goal is a 1:1 or 1:1.2 ratio between the upper and lower lip for a balanced look.”

with results typically lasting 6 to 9 months before a touch-up is needed. This can vary based on the patient’s metabolic rate; younger patients (in their 20s and 30s) may metabolize it slightly faster, at around 5-7 months, while patients over 40 may see results persist for the full 9-month period. The following table outlines the typical outcomes and parameters for lip enhancement.

Treatment Parameter	Typical Value for Lip Enhancement	Notes
Average Volume Injected	1.0 mL (full syringe)	Often split 60% upper lip, 40% lower lip
Number of Injection Points	20 – 30	Micro-droplet technique for even spread
Procedure Time	20 – 30 minutes	Includes consultation and marking
Time to See Final Results	7 – 10 days	After minor swelling subsides completely
Average Duration of Results	6 – 9 months	Dependent on individual metabolism
Patient Satisfaction Rate	>85%	Based on 6-month post-treatment surveys

Post-treatment, patients can expect some swelling and potential minor bruising for the first 24-72 hours. Applying ice for 10-minute intervals can reduce swelling significantly. The final shape and volume settle into place after about 1 week. The risk of complications is low when performed by an experienced injector, with the most common being temporary asymmetry, which can be adjusted at a 2-week follow-up appointment if necessary. The cost for this treatment typically ranges from  $600 t o$ 1,200 per syringe, depending on geographic location and the practitioner’s expertise, making it a popular and effective investment for non-permanent facial enhancement.

Correcting Smile Lines (Nasolabial Folds)

Clinical studies tracking patients over 12 months show that a single treatment with 1.0 mL of product per fold can lead to a 60-70% improvement in severity scores as measured on the 5-point Wrinkle Assessment Scale. This makes it a highly effective, non-surgical solution for patients typically between 40 and 65 years old who are experiencing moderate to severe fold depth.

The injection technique is crucial for a natural outcome. Practitioners typically deposit the product in the deep dermis or subcutaneous plane along the entire length of the fold, which averages 6-8 cm in most adults. A common approach involves a series of 4-6 linear threads per side, using a cannula or needle to ensure the product is placed at the correct depth of approximately 4-5 mm. This creates a scaffolding effect that physically supports the overlying skin. The procedure itself is efficient, usually completed in under 30 minutes, and the immediate volume correction is visible, though the final result settles in about 7-10 days as the product integrates and any minor swelling resolves.

“For nasolabial folds, we’re not just filling a line; we’re restoring structural support that has been lost. I use an average of 0.8 to 1.2 mL per fold, depending on its depth and the patient’s facial anatomy. The goal is a 50-60% reduction in depth, not complete eradication, to maintain a natural look when smiling and talking.”

Most patients enjoy the effect for 12 to 15 months before a touch-up is needed. The cost for treating both folds typically ranges from  $900 t o$ 1,600 per session, influenced by the required volume and the clinic’s location. Patient satisfaction is consistently high, with post-treatment surveys indicating that over 90% of individuals are happy with the improvement and would recommend the procedure, citing a perceived reduction in facial age by 5-7 years on average. The risk profile is favorable; temporary side effects like bruising occur in about 15-20% of cases and usually fade within 5-7 days, while more significant complications are rare when performed by a qualified injector.

Improving Chin and Jawline Contour

In clinical practice, over 80% of patients seeking jawline enhancement report a high level of satisfaction, with practitioners noting an average improvement of 60-70% in jawline definition as measured by lateral view photographs and patient-reported outcomes. This treatment is particularly popular among individuals aged 30 to 55 looking to address early jowling or a recessed chin without undergoing surgery.

The procedure is highly strategic, involving the placement of the product along the periosteum (the layer of connective tissue covering the bone) to build a supportive structure. A comprehensive treatment for both the chin and jawline typically requires 1.5 to 2.0 mL of product per side, injected through 20-40 precise entry points along the mandibular border. The product’s high G’ modulus (elasticity of around 400 Pa) is critical here, as it provides the necessary lifting capacity and resistance to deformation from the powerful masseter muscle. The entire process takes approximately 45-60 minutes, and while results are immediately visible, the final contour settles into its permanent, natural-looking state after about 2-3 weeks.

Key technical parameters for jawline contouring include:

Injection Depth: Precise supraperiosteal placement at a depth of ≥8 mm to ensure safety and optimal lifting effect.
Linear Threading Technique: Each thread deposits approximately 0.05-0.1 mL of product for consistent distribution.
Target Area Length: The treatment typically covers the entire mandibular angle and body, a linear distance of approximately 10-12 cm per side.
Pain Management: Most practitioners use a dental nerve block, which provides complete anesthesia for 60-90 minutes, ensuring patient comfort throughout the procedure.

Patients can expect the enhanced contour to remain effective for 18 to 24 months before a follow-up treatment is necessary. The investment reflects this durability, with costs typically ranging from  $1, 800 t o$ 3,200 for a full jawline and chin sculpting session. Temporary side effects are common but manageable; nearly 100% of patients experience swelling for 5-7 days, and about 25% may develop bruising that resolves within 7-10 days. The risk of more serious complications, such as vascular compromise, is minimized to less than 0.1% when performed by an experienced, trained injector who understands the complex anatomy of the lower face.

Boosting Cheek Volume and Definition

The midface is the cornerstone of a youthful appearance, and deflation of the cheek area is a primary indicator of aging. This volume loss leads to a flattened appearance and can exacerbate the visibility of nasolabial folds and under-eye hollows. Elasty G filler is expertly engineered to restore this foundational support, lifting and re-contouring the midface for a more vibrant look. Clinical data indicates that over 90% of patients report a significant improvement in their facial profile, with practitioners measuring an average 2-4 mm increase in midface projection post-treatment. This procedure is highly sought after by individuals, typically between 35 and 60 years old, experiencing age-related volume depletion.

The technique involves deep, supraperiosteal injection to build a stable base that provides an 80-90% efficient lifting effect on the overlying soft tissues. A comprehensive cheek augmentation typically requires 1.0 to 1.5 mL of product per cheek, strategically placed in the deep malar and submalar regions. The product’s high viscosity (over 600,000 cP) and elastic modulus (G’ > 450 Pa) are non-negotiable for this area, providing the necessary structural integrity to support the midface without shifting. The procedure duration averages 30-45 minutes, and while a 60-70% improvement is visible immediately, the final result—as swelling subsides and the product integrates—is apparent within 10-14 days.

Critical technical specifications for optimal cheek augmentation include:

Projection Gain: Achieves an average increase of 2-4 mm in midface projection, measured from the lateral canthus to the cheek apex.
Injection Plane: Deposited precisely at a depth of ≥10 mm on the periosteum for maximum stability and a natural lift.
Bolus Placement: Each bolus consists of 0.1-0.2 mL of product, with 3-5 boluses used to construct a stable, triangular support structure per cheek.
Anesthesia Protocol: A regional nerve block provides effective anesthesia for approximately 45-60 minutes, ensuring a comfortable experience with a pain rating of 2-3/10 on average.

Patients can expect the restored volume and definition to last 18 to 24 months, making it a highly durable treatment. The investment for this procedure typically ranges from  $1, 200 t o$ 2,500 per syringe, with most patients requiring 1-2 syringes total. Post-procedure, 95% of patients experience mild to moderate swelling for 5-7 days, and about 20% may see minor bruising that resolves within a week. The probability of significant adverse events is extremely low, at <0.09%, when the procedure is performed by a specialist with a deep understanding of facial anatomy and ultrasound-guided injection techniques.

Reducing Under-Eye Hollows

The under-eye area, or tear trough, is one of the most delicate and technically challenging regions to treat. Hollowing here is primarily caused by a combination of fat pad atrophy, ligament loosening, and bone resorption, which casts a shadow that creates a perpetually tired appearance. Elasty G filler is meticulously designed for this precise indication, offering a smooth, highly cohesive gel that integrates seamlessly to disguise the shadow and blend the cheek-to-lid transition. Patient satisfaction surveys indicate that over 88% of individuals report a 50-60% reduction in hollow depth, with a significant improvement in their perceived tiredness and age.

The procedure demands exceptional skill due to the complex vascular anatomy and thin skin in this area, which averages less than 1 mm in thickness. A typical treatment for both tear troughs requires a minimal volume of 0.5 to 1.0 mL, administered through a fine-gauge cannula via 1-2 entry points per side. The product’s specific elasticity (G’ of ~150 Pa) and viscosity (approximately 200,000 cP) are calibrated to be soft enough to avoid visibility yet firm enough to provide structural support. The injection is performed in the deep supraperiosteal plane, precisely at a depth of 3-5 mm, to ensure safety and a natural outcome. The entire process is quick, often completed in 20-30 minutes, with results visible immediately, though the final, settled result is appreciated after 10-14 days as minor swelling subsides.

Key technical considerations for under-eye rejuvenation include:

Volume Precision: Each tear trough typically requires only 0.25-0.5 mL of product, administered in micro-droplets to prevent lumpiness.
Cannula Safety: Using a 27-gauge, 40 mm long blunt cannula significantly reduces the risk of bruising and vascular injury compared to sharp needles.
Depth Accuracy: Placement in the supraperiosteal plane, at a consistent 3-5 mm depth, is critical to avoid superficial placement that can lead to visibility (Tyndall effect).
Pain Management: Most patients report a pain level of 3/10; a local nerve block is rarely needed, with topical anesthetic and ice proving sufficient 90% of the time.

The following table outlines the typical treatment profile and expected outcomes for tear trough augmentation:

Parameter	Typical Value / Range	Clinical Significance
Total Volume Used	0.5 – 1.0 mL	Very low volume required due to tissue delicacy
Number of Injection Points	1 – 2 per side (cannula)	Minimizes trauma and bruising risk
Injection Depth	3 – 5 mm (supraperiosteal)	Ensures product safety and prevents visibility
Procedure Time	20 – 30 minutes	Includes marking, anesthesia, and injection
Time to Final Result	10 – 14 days	Time needed for swelling resolution and product integration
Result Duration	9 – 12 months	Shorter than other areas due to high lymphatic activity

The longevity of the correction is good, typically lasting 9 to 12 months before a subtle retreat is needed. The investment is reflective of the high skill level required, with costs ranging from  $700 t o$ 1,400 per syringe. Post-treatment, patients should expect mild swelling in 95% of cases, which usually resolves within 48-72 hours. Bruising occurs in approximately 25% of patients and typically fades within 5-7 days. The risk of more significant complications, such as vascular compromise or visibility, is kept below 0.5% when the procedure is performed by an injector specializing in periorbital treatments.